Candles are a beautiful and fragrant way to add ambiance to any room, but they can also be a bit of a hassle to keep burning evenly. If you’ve ever experienced a candle that burns down the middle, leaving a thick layer of wax around the edges, or one that tunnels down the center, leaving a large pool of melted wax at the bottom, you know what we mean..
But don’t despair! There are a few simple things you can do to ensure that your candles burn evenly, every time. Here are our expert tips and tricks:.
**1. Trim the wick to 1/4 inch before each burn.** This will help to prevent the flame from getting too large and smoking, and it will also help the candle to burn more evenly..
**2. Burn the candle for at least 3-4 hours at a time.** This will give the wax time to melt all the way to the edges of the candle. If you only burn the candle for a short period of time, the wax will not have a chance to melt evenly and you may end up with a tunneling effect..
**3. Avoid burning the candle in drafts.** Drafts can cause the flame to flicker and move, which can lead to uneven burning. If you must burn the candle in a drafty area, try to shield it from the wind with a candle holder or a piece of paper..
**4. Place the candle on a level surface.** This will help to prevent the wax from pooling on one side of the candle..
**5. Keep the candle away from flammable materials.** This includes curtains, paper, and other objects that could easily catch fire..
**6. Extinguish the candle properly.** To extinguish the candle, gently blow out the flame. Do not use a candle snuffer, as this can cause the wick to smolder and create a smoky odor..
**7. Clean the candle regularly.** As the candle burns, it will accumulate soot and debris. To clean the candle, simply wipe it down with a damp cloth..
**Candle Care Troubleshooting:**.
**Problem:** The candle is burning down the middle, leaving a thick layer of wax around the edges..
**Solution:** This is likely due to the wick being too long. Trim the wick to 1/4 inch before each burn and burn the candle for at least 3-4 hours at a time..
**Problem:** The candle is tunneling down the center, leaving a large pool of melted wax at the bottom..
**Solution:** This is likely due to the candle not being burned for long enough at a time. Burn the candle for at least 3-4 hours at a time to allow the wax to melt all the way to the edges of the candle..
**Problem:** The flame is flickering and smoking..
**Solution:** This is likely due to the wick being too long or the candle being burned in a draft. Trim the wick to 1/4 inch and shield the candle from the wind with a candle holder or a piece of paper..
**Problem:** The candle is leaving a smoky odor..
**Solution:** This is likely due to the wick not being trimmed properly. Trim the wick to 1/4 inch before each burn and extinguish the candle properly by gently blowing out the flame..
With a little care and attention, you can ensure that your candles burn evenly and beautifully, every time. So go ahead, light a candle and enjoy the ambiance!.
